3D ANIMATION DESIGN "SCIENCE, LANTERNS TO HEAVEN" USING THE POSE-TO-POSE METHOD

  • Desy Apriliyanti (1*) Universitas Islam Negeri Maulana Malik Ibrahim Malang
  • Juniardi Nur Fadila (2)
  • Fresy Nugroho (3)

  • (*) Corresponding Author
Keywords: Animasi 3D, Pose to Pose Method, Lantern Towards Heaven

Abstract

In today's era, technology and communication have experienced very rapid development. Islamic values ​​raised through the media are an effort in people's lives today. Including through the media of 3D animated films that rely on entertaining audio-visuals and messages conveyed through animated films can also be easily captured by the audience. In addition, the selection of animated films is based on the number of animated films circulating on social media such as YouTube and other electronic media, and this film can affect the attention of many people. Animated film designed by the author with the theme of the importance of studying can lead to Allah SWT's heaven. Making this animated film will use Blender software version 2.80. The method used is "Pose-to-Pose" by determining each key pose movement to produce a good movement. Using this method makes the work more effective or faster; if there is an error in the pose, it can be easily corrected. The design of the 3D animated film entitled "Science, Lantern Towards Heaven" is expected to be useful for the audience and take the moral message in it, which is to increase enthusiasm for learning or studying

Downloads

Download data is not yet available.

References

A. Mahardika and H. Destiana, “Animasi Interaktif Pembelajaran Pengenalan Hewan Dan Alat Transportasi Untuk Siswa Taman Kanak - Kanak,” Pilar Nusa Mandiri, vol. X, no. 1, 2014.

A. Sirumapea, S. Ramdhan, and S. Aisah, “Film Animasi 3D ‘Pemuda yang Hatinya Bergantung pada Masjid,’” Acad. J. Comput. Sci. Res., vol. 3, no. 1, pp. 1–5, 2021, doi: 10.38101/ajcsr.v3i1.317.

A. R. Putri et al., “Pembuatan Simulasi Perang Zaman Pertengahan dengan Metode Pose to Pose Menggunakan Software Blender,” JISKA (Jurnal Inform. Sunan Kalijaga), vol. 6, no. 1, p. 1, 2021, doi: 10.14421/jiska.2021.61-01.

A. Amin, “Pembuatan Film Animasi Cara Umrah Sesuai Software Blender Skripsi Oleh : Ainul Amin,” Teknol. Pendidik, p. 134, 2016.

A. Aryanto, T. Hisyam Muhammad Umar, and D. Winarso, “Analisis Perbandingan Teknik 3D Rendering Cycles Dan Eevee Pada Software Blender,” J. Fasilkom, vol. 10, no. 1, pp. 11–19, 2020, doi: 10.37859/jf.v10i1.1902.

D. S. Afrizon, “Metode Pembelajaran Animasi 3D Harimau dengan Algoritma Pose to Pose dan Rekontruksi Rangka Menggunakan Morphing,” pp. 1–115, 2018, [Online]. Available: https://repository.unsri.ac.id/12539/.

E. Tripustikasari and A. D. Septiadi, “Film Animasi Pengenalan Saham Dengan Metode Motion Graphic,” Infotekmesin, vol. 10, no. 2, pp. 28–32, 2019, doi: 10.35970/infotekmesin.v10i2.51.

F. Teknologi and D. A. N. Informatika, “Animate Karakter Dalam Produksi Film Animasi 3D ‘ Mira Diwana ’ Menggunakan Teknik Pose To Pose,” 2018.

F. Firdaus NA, “Simulasi Gerak Hewan Burung Menggunakan Metode Pose To Pose Dalam Pembuatan Animasi 3d Dalam Surat Al-Fill Skripsi Oleh : Ferly Firdaus Na,” p. 91, 2019.

G. Arka, “Perancangan Dan Pembuatan Klip Video Animasi Band Carmen,” pp. 1–54, 2009, [Online]. Available: http://dx.doi.org/10.1016/B978-0-12-849873-6.00001-7.

G. Mencapai and G. Ahli, “Laporan Tugas Akhir Pembuatan Film Animasi 2 Dimensi ‘ Pertempuran 5 Hari 5 Malam Di Palembang ’”Kementerian Riset, Teknologi Dan Pendidikan Tinggi Politeknik Palcomtech, 2018.

H. Nainggolan, “Perancangan Animasi Wayang Pandawa Lima dalam Lakon Pilkada dengan Menggunakan Metode Pose to Pose,” Maj. Ilm. INTI, vol. 5, no. 1, pp. 64–69, 2017, [Online]. Available: https://ejurnal.stmik-budidarma.ac.id/index.php/inti/article/view/539.

H. Budi Setiawan, “PEMBUATAN FILM ANIMASI 3D ”AIR” MENGGUNAKAN BLENDER 2.5,” Amikom, Yogyakarta, pp. 1–15, 2012.

I. H. Purwanto, L. Qodarsih, F. H. Majid, and K. A. Syamrahmarini, “Implementasi Pose To Pose Pada Simulasi Gerak Panda Berjalan Dengan Teknik Frame By Frame,” Explore, vol. 9, no. 1, p. 43, 2019, doi: 10.35200/explore.v9i1.164.

K. D, “Etika Menuntut Ilmu dalam Al-Qur’an Surah al-Kahfi Ayat 60-78 (Studi al-Tafsīr Marāḥ Labîd Syeikh Nawawi al-Bantani),” UIN SMH BANTEN Instutional Repos., pp. 35–40, 2021.

K. Ainiyah, N. Hidayah, F. P. Damayanti, I. N. Hidayah, J. N. Fadila, and F. Nugroho, “Rancang Bangun Film Animasi 3D Sejarah Terbentuknya Kerajaan Samudra Pasai Menggunakan Software Blender,” JISKA (Jurnal Inform. Sunan Kalijaga), vol. 5, no. 3, p. 164, 2020, doi: 10.14421/jiska.2020.53-04.

M. I. Setiawan, A. Trisnadoli, and E. S. Nugroho, “Penerapan Teknik UV Mapping dan Texture Painting Dalam Pembuatan Film Animasi 3D Bujang Buta,” Teknik, vol. 40, no. 1, p. 26, 2019, doi: 10.14710/teknik.v39i3.22758.

S. F. Salmon, V. Tulenan, and B. A. Sugiarso, “Penggunaan Metode Pose to Pose dalam Pembuatan Animasi 3D Tarian Minahasa Maengket,” J. Tek. Inform., vol. 12, no. 1, pp. 1–9, 2017, doi: 10.35793/jti.12.1.2017.17867.

S. Wahyudi, “Pembuatan Film Animasi Tuntunan Sholat Menurut Sunnah Nabi Muhammad SAW Menggunakan Software Blender,” pp. 1–136, 2015.

T. Zebua, B. Nadeak, and S. B. Sinaga, “Pengenalan Dasar Aplikasi Blender 3D dalam Pembuatan Animasi 3D,” J. ABDIMAS Budi Darma, vol. 1, no. 1, pp. 18–21, 2020.

U. A. Wildy, “Animating Karakter Pada Film Animasi 3D ‘ Perjalanan Rempah- Rempah ,’” Politeknik Negeri Jakarta, 2017.

V. Waeo, A. S. M. Lumenta, and B. A. A. Sugiarso, “Implementasi Gerakan Manusia Pada Animasi 3D Dengan Menggunakan Menggunakan Metode Pose to pose,” J. Tek. Inform., vol. 9, no. 1, pp. 1–8, 2016, doi: 10.35793/jti.9.1.2016.14641.

Y. Caroline, V. Tulenan, and B. A. Sugiarso, “Rancang Bangun Film Animasi 3 Dimensi Universitas Sam Ratulangi,” J. Tek. Inform., vol. 9, no. 1, pp. 1–7, 2016, doi: 10.35793/jti.9.1.2016.14639.

Y. Syahfitri, “Teknik Film Animasi Dalam Dunia Komputer,” J. SAINTIKOM, vol. 10, no. 3, pp. 213–217, 2011.

Y. Affandi, N. Satia Nuryanto, E. Mahendra, and S. Eka Setiawan, “Implementasi Metode Pose to Pose dalam Pembuatan Animasi 2D Gerakan Ruku’ Shalat,” Respati, vol. 14, no. 1, pp. 12–16, 2019, [Online]. Available: http://jti.respati.ac.id/index.php/jurnaljti/article/view/265.

Published
2022-08-31
How to Cite
[1]
D. Apriliyanti, J. Fadila, and F. Nugroho, “3D ANIMATION DESIGN "SCIENCE, LANTERNS TO HEAVEN" USING THE POSE-TO-POSE METHOD”, jitk, vol. 8, no. 1, pp. 46 - 55, Aug. 2022.
Article Metrics

Abstract viewed = 26 times
PDF downloaded = 16 times