COMPARATIVE PERFORMANCE OF SEQUENTIAL CNN AND PRE-TRAINED LEARNING FOR 3D PRINTING DEFECT CLASSIFICATION
DOI:
https://doi.org/10.33480/jitk.v11i3.7337Keywords:
3D Printing, CNN, Classification, Pre-trainedAbstract
3D Printing is currently needed in various industries, including education in terms of research development. In this study, researchers classify 3D printing defect images to recognize images that are difficult to see with the naked eye. With limited observation, an image classification method is needed to help users detect defects in the printing process with a Deep Learning model. The printing process uses PLA and ABS-based filament materials, which are mostly used in 3D Printing objects with fused deposition modeling (FDM)-based 3D Printer machines. In this study, there are several stages, including data augmentation, model development using sequential CNN, pre-trained CNN based with pre-trained models, namely VGG-16 and VGG-19, training, validation, and model evaluation. The dataset taken for training is 1557, with a ratio of 80 percent training and 20 percent validation between defective and non-defective objects. The results of this study have a good accuracy value on Sequential CNN with an accuracy of 99.68% compared to pre-trained CNN models, namely VGG-16 and VGG-19. The classification results are also compared with other additive manufacturing classification methods with different machines and materials such as metal and 3D Food Printing which are measured based on classification model optimization analysis
Downloads
References
[1] A. Kantaros et al., “3D printing: Making an innovative technology widely accessible through makerspaces and outsourced services,” Mater. Today Proc., vol. 49, pp. 2712–2723, 2021, doi: 10.1016/j.matpr.2021.09.074.
[2] T. Sivarupan et al., “A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting,” Addit. Manuf., vol. 40, 2021, doi: 10.1016/j.addma.2021.101889.
[3] S. Bock, T. Rades, J. Rantanen, and R. Scherließ, “Additive manufacturing in respiratory sciences – Current applications and future prospects,” Adv. Drug Deliv. Rev., vol. 186, p. 114341, 2022, doi: 10.1016/j.addr.2022.114341.
[4] M. A. Abdullah and T. F. Abbas, “Numerical Developing the Internet of Things To Remotely Monitor the Performance of a Three Dimensions Printer for Free-Form Surface,” J. Eng. Sci. Technol., vol. 18, no. 6, pp. 2809–2822, 2023.
[5] D. J. S. Agron, J. M. Lee, and D. S. Kim, “Nozzle thermal estimation for fused filament fabricating 3D printer using temporal convolutional neural networks,” Appl. Sci., vol. 11, no. 14, 2021, doi: 10.3390/app11146424.
[6] W. L. Ng, G. L. Goh, G. D. Goh, J. S. J. Ten, and W. Y. Yeong, “Progress and Opportunities for Machine Learning in Materials and Processes of Additive Manufacturing,” Adv. Mater., 2024, doi: 10.1002/adma.202310006.
[7] M. Cao, L. Fu, F. Ai, and K. Zhou, “Improved 3D Printing Extrusion Defect Detection Method Based On YOLO-v8,” 2024, [Online]. Available: https://ssrn.com/abstract=4800007
[8] C. Mawardi, A. Buono, K. Priandana, and Herianto, “Real-Time Defect Detection Monitoring System For Extrusion-based 3D Food Printing Using Internet of Things,” Proc. 3rd 2023 Int. Conf. Smart Cities, Autom. Intell. Comput. Syst. ICON-SONICS 2023, pp. 109–113, 2023, doi: 10.1109/ICON-SONICS59898.2023.10435335.
[9] J. Xie, A. Saluja, A. Rahimizadeh, and K. Fayazbakhsh, “Development of automated feature extraction and convolutional neural network optimization for real-time warping monitoring in 3D printing,” Int. J. Comput. Integr. Manuf., vol. 35, no. 8, pp. 813–830, 2022, doi: 10.1080/0951192X.2022.2025621.
[10] T. Hattiya, K. Dittakan, and S. Musikasuwan, “Diabetic Retinopathy Detection using Convolutional Neural Network: A Comparative Study on Different Architectures,” Eng. Access, vol. 7, no. 1, pp. 50–60, 2021, doi: 10.14456/mijet.2021.8.
[11] S. Krishnapriya and Y. Karuna, “Pre-trained deep learning models for brain MRI image classification,” Front. Hum. Neurosci., vol. 17, 2023, doi: 10.3389/fnhum.2023.1150120.
[12] E. Tanuwijaya and A. Roseanne, “Modifikasi Arsitektur VGG16 untuk Klasifikasi Citra Digital Rempah-Rempah Indonesia,” MATRIK J. Manajemen, Tek. Inform. dan Rekayasa Komput., vol. 21, no. 1, pp. 189–196, 2021, doi: 10.30812/matrik.v21i1.1492.
[13] E. Westphal and H. Seitz, “A machine learning method for defect detection and visualization in selective laser sintering based on convolutional neural networks,” Addit. Manuf., vol. 41, no. November 2020, p. 101965, 2021, doi: 10.1016/j.addma.2021.101965.
[14] J. Zhou, H. Li, L. Lu, and Y. Cheng, “Machine Vision-Based Surface Defect Detection Study for Ceramic 3D Printing,” Machines, vol. 12, no. 3, pp. 1–15, 2024, doi: 10.3390/machines12030166.
[15] K. Yarak, A. Witayangkurn, K. Kritiyutanont, C. Arunplod, and R. Shibasaki, “Oil palm tree detection and health classification on high‐resolution imagery using deep learning,” Agric., vol. 11, no. 2, pp. 1–17, 2021, doi: 10.3390/agriculture11020183.
[16] K. Maharana, S. Mondal, and B. Nemade, “A review: Data pre-processing and data augmentation techniques,” Glob. Transitions Proc., vol. 3, no. 1, pp. 91–99, 2022, doi: 10.1016/j.gltp.2022.04.020.
[17] N. A. M. Roslan, N. M. Diah, Z. Ibrahim, Y. Munarko, and A. E. Minarno, “Automatic plant recognition using convolutional neural network on Malaysian medicinal herbs: the value of data augmentation,” Int. J. Adv. Intell. Informatics, vol. 9, no. 1, pp. 136–147, 2023, doi: 10.26555/ijain.v9i1.1076.
[18] A. Saber, M. Sakr, O. M. Abo-Seida, A. Keshk, and H. Chen, “A Novel Deep-Learning Model for Automatic Detection and Classification of Breast Cancer Using the Transfer-Learning Technique,” IEEE Access, vol. 9, pp. 71194–71209, 2021, doi: 10.1109/ACCESS.2021.3079204.
[19] S. Mascarenhas and M. Agarwal, “A comparison between VGG16, VGG19 and ResNet50 architecture frameworks for Image Classification,” Proc. IEEE Int. Conf. Disruptive Technol. Multi-Disciplinary Res. Appl. CENTCON 2021, pp. 96–99, 2021, doi: 10.1109/CENTCON52345.2021.9687944.
[20] M. A. A. Walid, S. M. M. Ahmed, M. Zeyad, S. M. S. Galib, and M. Nesa, “Analysis of machine learning strategies for prediction of passing undergraduate admission test,” Int. J. Inf. Manag. Data Insights, vol. 2, no. 2, p. 100111, 2022, doi: 10.1016/j.jjimei.2022.100111.
[21] S. Kumar, S. Sayyad, and A. Bongale, “Fault Classification of 3D-Printing Operations Using Different Types of Machine and Deep Learning Techniques,” AI, vol. 5, no. 4, pp. 1759–1778, 2024, doi: 10.3390/ai5040087.
[22] C. Mawardi, A. Buono, K. Priandana, and Herianto, “Performance Analysis of ResNet50 and Inception-V3 Image Classification for Defect Detection in 3D Food Printing,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 14, no. 2, pp. 798–804, 2024, doi: 10.18517/ijaseit.14.2.19863.
[23] N. H. Mohd Yusoff, W. J. Chew, C. H. Chong, and Y. K. Wan, “Artificial intelligence in color classification of 3D-printed enhanced adsorbent in textile wastewater,” J. Water Process Eng., vol. 65, no. June, p. 105776, 2024, doi: 10.1016/j.jwpe.2024.105776.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Dwi Riyono, Cholid Mawardi, Herianto
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
-a.jpg)
-b.jpg)
