PENERAPAN METODE SIMPLE ADDITIVE WEIGHTING (SAW) DENGAN MODEL FUZZY MODEL ATTRIBUTE DECISION MAKING (FMADM) PENILAIAN KINERJA KARYAWAN DTPEDULI

  • Fajar Agustini Sistem Informasi Akuntansi Kampus Kabupaten Karawang Universitas Bina Sarana Informatika
  • Elien Riris Ariska Sistem Informasi STMIK Nusa Mandiri
DOI: https://doi.org/10.33480/techno.v16i1.107
Keywords: Fuzzy Simple Additive Weighting, FSAW, Fuzzy Model Atribute Decision Making

Abstract

Performance assessment of a job in an agency or company is a stage of job evaluation to determine the benchmark in determining the quality and achievement of each employee. In the process, even an agency or company has a standard to measure the success of work. With the many service programs and empowerment of the people conducted in DTPeduli Bekasi encourage each employee to provide the best performance of each employee. However, in the development of performance appraisal is done less than the maximum because there is no system support. Results from research Employee performance assessment on DTPeduli Bekasi with some aspects of the criteria using Fuzzy Simple Additive Weighting (FSAW) model has been running well and can generate weighting assessment criteria and information clear and fast compared to the calculation manually so that Branch Head DTPeduli Bekasi can use it as a tool for decision making appropriate in decision making employee performance appraisal in DTPeduli Bekasi.

References

Abadi, S., & Latifah, F. (2016). DECISION SUPPORT SYSTEM PENILAIAN KINERJA KARYAWAN PADA PERUSAHAAN MENGGUNAKAN METODE SIMPLE ADDITIVE WEIGHTING Satria Abadi , Febriani Latifah, 6, 37–43.

Agustini, F., & Ariska, E. R. (2018). Laporan Akhir Penelitian Mandiri STMIK Nusa Mandiri Jakarta.

Ardila, N. D., & Pramusinto, H. (2015). Pengaruh kepemimpinan, komunikasi internal, dan motivasi kerja terhadap kinerja pegawai bp3akb provinsi jawa tengah, X(1), 53–66.

Djamain, Y., & Christin, H. De. (2015). Sistem Pendukung Keputusan Penerimaan Pegawai Baru PT.PLN (Persero) Kantor Pusat dengan Menggunakan Metode Simple Additive Weighting (SAW),tle. Teknik Iformatika, 8, 39–47.

Khairul, K., Pembangunan, U., Budi, P., Putera, A., Siahaan, U., Pembangunan, U., & Budi, P. (2016). Decision Support System in Selecting The Appropriate Laptop Using Simple Additive Weighting, (December).

Mudayana, A. A. (2013). Pengaruh motivasi dan beban kerja terhadap kinerja karyawan di rumah sakit nur hidayah bantul. Jurnal Kesehatan Masyarakat, 84–91.

Rusdi, I. (2015). KELULUSAN PESERTA PRAJABATAN MENGGUNAKAN SIMPLE ADDITIVE WEIGHTING PADA PUSAT. Jurnal Techno Nusa Mandiri, XII(1), 64–68.

Rusdiansyah. (2017). SEKOLAH MENENGAH KEJURUAN DENGAN METODE SIMPLE. Jurnal Techno Nusa Mandiri, XIV(1), 49–56.

Sheyla Feby Liesdiana, P. M. (2017). Sistem Pendukung Keputusan Penentuan Kontrak Kerja Agent Call Center Menggunakan. Jurnal Informatika, 4(1), 76–81.

Siprianus Endro Sri Widodo, Septia Lutfi, S. (2014). Sistem Pendukung Keputusan Penilaian Kinerja Karyawan Menggunakan Metode Simple Additive Weighting (SAW) Pada PT. Indonesia Steel Tube Work Oleh.

Susanti, M. I., & Wasiyanti, S. (2017). Metode Simple Additive Weighting ( Saw ) Dalam Penentuan Pemberian Beasiswa Pada Siswa Sekolah Menengah Atas, 5(2), 114–123.

Yahya, A., & Yudihartanti, Y. (n.d.). Sistem Penilaian dan Perankingan Karyawan pada Radar Banjarmasin dengan Menggunakan Metode Simple Additive Weighting.
Published
2019-03-15
How to Cite
Agustini, F., & Ariska, E. (2019). PENERAPAN METODE SIMPLE ADDITIVE WEIGHTING (SAW) DENGAN MODEL FUZZY MODEL ATTRIBUTE DECISION MAKING (FMADM) PENILAIAN KINERJA KARYAWAN DTPEDULI. Jurnal Techno Nusa Mandiri, 16(1), 21-28. https://doi.org/10.33480/techno.v16i1.107
Issue
Vol 16 No 1 (2019): Techno Nusa Mandiri : Journal of Computing and Information Technology Periode Maret 2019
Section
Articles
License

The copyright of any article in the TECHNO Nusa Mandiri Journal is fully held by the author under the Creative Commons CC BY-NC license.

  1. The copyright in each article belongs to the author.
  2. Authors retain all their rights to published works, not limited to the rights set out on this page.
  3. The author acknowledges that Techno Nusa Mandiri: Journal of Computing and Information Technology (TECHNO Nusa Mandiri) is the first to publish with a Creative Commons Attribution 4.0 International license (CC BY-NC).
  4. Authors can enter articles separately, manage non-exclusive distribution, from manuscripts that have been published in this journal into another version (for example: sent to author affiliation respository, publication into books, etc.), by acknowledging that the manuscript was published for the first time in Techno Nusa Mandiri: Journal of Computing and Information Technology (TECHNO Nusa Mandiri);
  5. The author guarantees that the original article, written by the stated author, has never been published before, does not contain any statements that violate the law, does not violate the rights of others, is subject to the copyright which is exclusively held by the author.
  6. If an article was prepared jointly by more than one author, each author submitting the manuscript warrants that he has been authorized by all co-authors to agree to copyright and license notices (agreements) on their behalf, and agrees to notify the co-authors of the terms of this policy. Techno Nusa Mandiri: Journal of Computing and Information Technology (TECHNO Nusa Mandiri) will not be held responsible for anything that may have occurred due to the author's internal disputes.