DESIGN OF AN AUTOMATIC STERILIZATION GATE TOOL USING PIR MOTION SENSOR

Penulis

  • Faiq Fawwaz Amrullah UIN Syarif Hidayatullah Jakarta
  • Dewi Khairani UIN Syarif Hidayatullah Jakarta
  • Siti Ummi Masruroh UIN Syarif Hidayatullah Jakarta

DOI:

https://doi.org/10.33480/pilar.v17i1.1937

Kata Kunci:

Motion Sensor, PIR, Sterilization Pump, DC Pump

Abstrak

This automatic sterilization gate tool is a simple tool that changes the manual method to a systemized and more efficient way. This tool uses an infrared motion sensor in which there is a main component, namely the PIR (Pyroelectric Infra-Red) sensor, which is a material that reacts to radiation and movement in front of it. This tool also uses a 12v dc pump which is used to draw out the disinfectant liquid stored in the container. This gate tool is designed using the main material and some additional materials, the automatic gate can discharge about 11 seconds of liquid from objects or people that pass through the sensor range, 11 seconds is the minimum time for this tool to work while a distance of 6 meters is the range from where the sensor is located. From that time it proved that this gate tool has 100% accuracy and runs well. This gate tool is used every day, turned on from the morning, and turned off at night. Every 17.00 hours this gate tool is always replenished with supplies of disinfectant liquid. The automatic gate has helped the community to reduce the risk of transmission of the coronavirus, it also raises the awareness of the covid-19 pandemic. The whole system is implemented and is tested for real-time operation. It is found working satisfactorily. The gate tool can be further improved by adding a scanning device to perform tracing for passersby.

Unduhan

Data unduhan belum tersedia.

##submission.downloads##

Diterbitkan

2021-03-02

Cara Mengutip

Amrullah, F. F., Khairani, D., & Masruroh, S. U. (2021). DESIGN OF AN AUTOMATIC STERILIZATION GATE TOOL USING PIR MOTION SENSOR. Jurnal Pilar Nusa Mandiri, 17(1), 25–30. https://doi.org/10.33480/pilar.v17i1.1937

Terbitan

Vol 17 No 1 (2021): Pilar Nusa Mandiri : Journal of Computing and Information System Publishing Period for March 2021

Bagian

Articles

Lisensi

An author who publishes in the Pilar Nusa Mandiri: Journal of Computing and Information System agrees to the following terms:

  1. Author retains the copyright and grants the journal the right of first publication of the work simultaneously licensed under the Creative Commons Attribution-NonCommercial 4.0 License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal
  2. Author is able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book) with the acknowledgement of its initial publication in this journal.
  3. Author is permitted and encouraged to post his/her work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of the published work (See The Effect of Open Access).
    Read more about the Creative Commons Attribution-NonCommercial 4.0 Licence here: https://creativecommons.org/licenses/by-nc/4.0/.