SISTEM PEMILIHAN LAPTOP TERBAIK DENGAN MENGGUNAKAN METODE WEIGHTED PRODUCT (WP)

  • Susliansyah Susliansyah Sistem Informasi Universitas Bina Sarana Informatika
  • Ririn Restu Aria Sistem Informasi Universitas Bina Sarana Informatika
  • Susi Susilowati Sistem Informasi Universitas Bina Sarana Informatika
DOI: https://doi.org/10.33480/techno.v16i1.105
Keywords: Selection, Laptop Best, Weighted Products

Abstract

The Weighted Product method requires a normalization process because this method assumes the results of evaluating each attribute. The results of these multiplications have not been meaningful if they have not been compared (divided) with standard values. The weight for the benefit attribute functions as a positive power in the multiplication process, while the weight of the cost functions as a negative rank. The Weighted Product method uses multiplication as a linking attribute rating, where the rating of each attribute must be raised first with the corresponding weight. Weighting Product Weighted method is calculated based on the level of importance. This system requires input weight values based on prospective buyers' needs in the form of prices, RAM capacity, processor type, Harddisk capacity, and VGA (Video Graphics Array). The results of this study provide laptop recommendations according to specification requirements for prospective buyers with 100% calculation accuracy based on manual calculations and calculations on laptop selection decision support systems.

References

Hartanto, T., & Prasetiyowati, M. I. (2012). Sistem Pendukung Keputusan Pemilihan Laptop Berbasis Web dengan Metode Analytical Hierarchy Process ( Studi Kasus : SAMCO COMPUTER ). ULTIMATICS, IV(2), 7–15.

Hatta, H. R., Rizaldi, M., & Khairina, D. M. (2016). Penerapan Pen erapan Metode Weighted Product U ntuk Pemilihan Lokasi L ahan Baru Pemakaman Muslim Dengan Visualisasi Google Maps. TEKNOSI, 02(03), 85–94.

Kurniasih, D. L. (2013). Sistem Pendukung Keputusan Pemilihan Laptop dengan Metode TOPSIS. Pelita Informatika Budi Darma, III(April), 6–13.

Nurjannah, N., Arifin, Z., & Khairina, D. M. (2015). Sistem Pendukung Keputusan Pembelian Sepeda Motor Dengan Metode Weighted Product. Jurnal Informatika Mulawarman, 10(2), 2–6.

Sanyoto, G. P., Handayani, R. I., & Widanengsih, E. (2017). SISTEM PENDUKUNG KEPUTUSAN PEMILIHAN LAPTOP UNTUK KEBUTUHAN OPERASIONAL DENGAN METODE AHP (STUDI KASUS : DIREKTORAT PEMBINAAN KURSUS DAN PELATIHAN KEMDIKBUD). Jurnal Pilar Nusa Mandiri, 13(2), 167–174.

SMKMandiriBekasi. (2018). Sistem Pemilihan Laptop Terbaik Dengan Menggunakan Metode Weighted Product (WP).

Supriyono, H., & Sari, C. P. (2015). Rumah Tinggal Menggunakan Metode Weighted Product. Jurnal Ilmu Komputer Dan Informatika Pemilihan, 1(1), 23–28.

Susliansyah, Aria, R. R., & Susilowati, S. (2018). SISTEM PEMILIHAN LAPTOP TERBAIK DENGAN MENGGUNAKAN METODE WEIGHTED PRODUCT (WP).

Syafitri, N. A., Sutardi, & Dewi, A. P. (2016). Penerapan metode Weighted Product Dalam Sistem Pendukung Keputusan Pemilihan Laptop Berbasis Web. SemanTIK, 2(1), 169–176.

Yoni, D. C., & Mustafidah, H. (2016). Penerapan Metode WP ( Weighted Product ) Untuk Pemilihan Mahasiswa Lulusan Terbaik di Fakultas Teknik Universitas Muhammadiyah Purwokerto. JUITA, IV(1), 22–27.

Zai, Y., Mesran, & Buulolo, E. (2017). Sistem Pendukung Keputusan untuk menentukan Buah Rambutan dengan Kualitas Terbaik menggunakan Metode Weighted Product (WP). Media Informatika Budidarma, 1(1), 8–11.
Published
2019-03-15
How to Cite
Susliansyah, S., Aria, R., & Susilowati, S. (2019). SISTEM PEMILIHAN LAPTOP TERBAIK DENGAN MENGGUNAKAN METODE WEIGHTED PRODUCT (WP). Jurnal Techno Nusa Mandiri, 16(1), 15-20. https://doi.org/10.33480/techno.v16i1.105
Issue
Vol 16 No 1 (2019): Techno Nusa Mandiri : Journal of Computing and Information Technology Periode Maret 2019
Section
Articles
License

The copyright of any article in the TECHNO Nusa Mandiri Journal is fully held by the author under the Creative Commons CC BY-NC license.

  1. The copyright in each article belongs to the author.
  2. Authors retain all their rights to published works, not limited to the rights set out on this page.
  3. The author acknowledges that Techno Nusa Mandiri: Journal of Computing and Information Technology (TECHNO Nusa Mandiri) is the first to publish with a Creative Commons Attribution 4.0 International license (CC BY-NC).
  4. Authors can enter articles separately, manage non-exclusive distribution, from manuscripts that have been published in this journal into another version (for example: sent to author affiliation respository, publication into books, etc.), by acknowledging that the manuscript was published for the first time in Techno Nusa Mandiri: Journal of Computing and Information Technology (TECHNO Nusa Mandiri);
  5. The author guarantees that the original article, written by the stated author, has never been published before, does not contain any statements that violate the law, does not violate the rights of others, is subject to the copyright which is exclusively held by the author.
  6. If an article was prepared jointly by more than one author, each author submitting the manuscript warrants that he has been authorized by all co-authors to agree to copyright and license notices (agreements) on their behalf, and agrees to notify the co-authors of the terms of this policy. Techno Nusa Mandiri: Journal of Computing and Information Technology (TECHNO Nusa Mandiri) will not be held responsible for anything that may have occurred due to the author's internal disputes.